Tecon-SC+ Coating

TECON-SC is a solvent based waterproofing formulation developed and produced by TEVO Creations, providing long lasting & effective waterproofing on almost all porous building surface, it is designed for superior penetration depth along with extreme chloride and alkaline resistance. Can be used at extreme conditions where 24/7 water submerge and ponding required, e.g. sea port pillars, swimming pool, bridge, etc. Provides superb corrossion prevention over reinforced steels bar inside the concrete structure.


Whilst TECON-SC does not work as a sealant, instead of sealing the micropores of the substrate, TECON-SC performs inner coat. Coated surface remains breathable where moisture trapped behind the coated surface still able to evaporate through the pores to the enviroment, this is extremely important by releasing the inner pressure of the substrate, minimizing cracking of the surface.


TECON-SC is also integrated with biocides formulation which creates an effective barrier against organic mold, fungi & algae growth, preserving the surface appearance that last for years.


Unlike conventional waterproofing coatings, TECON-SC leave no trace on the coated surface; it is invisible and it will no alter the original natural appearance of the substrate. The completely invisible treatment cannot be removed by water, cleaning agent or with high pressure equipment; durable strong abrassion & mechanical wear resistant.

Surface Preparation (Pre-Application)

A proper surface preparation helps to ensure maximum performance and durability of our coatings. The surface must be completely clean from grimes, dirts, dust & grease. Let the surface dry of completely before application. For new casted concrete, solution should only be apply after four weeks.


POST TREATMENT : Application can be done either by roller, brush or sprayer. Apply adequately throughout the surface, make sure the surface is damp with the product. Second layer can be apply within 15 minutes from applying the first layer. Leave the surface drys and cure for the next 24 hours, avoid contact with water.

Solution Properties
Physical : Liquid
Color : Transparent
Odor : Slight odor
Finishing : Transparent, no alteration of finishing
Flammability : Flammable
Coverage : 6 – 10m² depending on porousity
Shelf Life : 18 months
Curing Time : 10 minutes drying, 24 hours full cure
VOC : 28g/Liter (EU limit: 40g/Lit)
Layer : Multiple layers allowed.

Second layer to be apply within 15 minutes after first layer application, wet on wet condition.

Reviews (0)


There are no reviews yet.

Be the first to review “Tecon-SC+ Coating”

This is a demo store for testing purposes — no orders shall be fulfilled. Dismiss