NOLI-Q WP-C150 is a solvent based waterproofing formulation developed and produced by TEVO Creations, providing long lasting & effective waterproofing on almost all porous building surface, it is designed for superior penetration depth along with extreme chloride and alkaline resistance. Can be used at extreme conditions where 24/7 water submerge and ponding required, e.g. sea port pillars, swimming pool, bridge, etc. Provides superb corrosion prevention over reinforced steels bar inside the concrete structure.
Whilst NOLI-Q WP-C150 does not work as a sealant, instead of sealing the micropores of the substrate, NOLI-Q WP-C150 performs inner coat. Coated surface remains breathable where moisture trapped behind the coated surface still able to evaporate through the pores to the environment, this is extremely important by releasing the inner pressure of the substrate, minimizing cracking of the surface.
On most of the smooth absorbent surfaces, NOLI-Q WP-C150 will also enhance the surface with SUPER HYDROPHOBIC capability, achieving water angles of >150 Degree; greatly enhance stain resistance of coated surface whilst dirt and grimes will be carried off by rain water or simple rinsing.
NOLI-Q WP-C150 also creates an effective barrier against organic mold, fungi & algae growth, preserving the surface appearance that last for years. Unlike conventional waterproofing coatings, TECON-WP C150 leave no trace on the coated surface; it is invisible and it will not alter the original natural appearance of the substrate. The completely invisible treatment cannot be removed by water, cleaning agent or with high pressure equipment; durable strong abrasion & mechanical wear resistant.
• Pier concrete pillar
• Extreme condition where
water submerging 24 / 7
• External & Internal Walls
• Flooring Waterproofing
• Rooftop Waterproofing
• Grouting Sealing
• Render & Stucco
• Mineral plaster
• *Able to apply on damp
Surface Preparation (Pre-Application)
A proper surface preparation helps to ensure maximum performance and durability of our coatings. The surface must be completely clean from grimes, dirts, dust & grease. Let the surface dry
of completely before application. For new casted concrete, solution should only be applied after FOUR WEEKS.
POST TREATMENT: Application can be done either by roller, brush
or sprayer. Apply adequately throughout the surface, make sure
the surface is damp with the product. Second layer can be applied
within 15 minutes from applying the first layer. Leave the surface
dry and cure for the next 24 hours, avoid contact with water.
This is a demo store for testing purposes — no orders shall be fulfilled. Dismiss