Cart

Shop

MetalGard 30ml

Specially formulated for metal surfaces, usable on aluminum & stainless steel parts. TEVO MetalGard formed a hardness of 9H withstanding heats, brake dust and abrasions; protects coated surface from ageing, oxidization, rusting and avoid any permanent stain marks. Sustain chrome mirror glossy finishing up to 2 years.

Categories: ,
Description

Durability : 12 months & above

Applicable Surface : Metal, Aluminums & Stainless Steel

Curing Time : 3 hrs (24 hrs fully cured)

Average Consumption / Car : N/A

Layer : Multiple

Thickness : 2 – 4.5 Micron

Contact Angle : >100 degree

Hardness : Above 9H  (Depends on amount of layer applied)

Directions for use

Wipe surface clean of dust or stains. Make sure are is dried completely before application.

Step 1 : (Coating)

Soak the coating onto the application sponge or dry application tissue/towel. Apply small section at a time by dragging the coating horizontally (Left to Right) once and vertically (Top to Bottom) once. Make sure the coating covers every part of the surface.

Step 2 : (Buffing)

Immediately, use a microfiber cloth to buff the coated surface, do not pressurize the buffing process. Buff off completely until there is no visible striking or lining. (If you have hard time buffing off the striking and lining, recoat the particular surface again with step 1)

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MetalGard 30ml”